|
802-0167
Photo to come
The MCR500 Interface, (part numbers 605-0167 and 605-0168) when
used in conjunction with the ABF (Part Number 605-0149 from Kit
802-0149) provides bench level interconnect, connecting the MCR500
bayonet connectors to the various inputs and outputs required to
perform audio playback and record. Power input connection is provided
to allow the (switched) supply of 28VDC to necessary equipment.
Connection to the MCR500 is effected via an interface
cable, which mates the 57 pin
rear connector of the ABF to P1 and P3 of the MCR500. Power supplied
to the ABF front panel located connector is then routed to the MCR500
(P3) as well as necessary internal circuitry.
Once the ABF has been mated to the MCR500, the ABF
provides a convenient point to connect to the various input and
output signals. Playback of stored audio can be accomplished by
attachment of the Avionica Ruggedized Service Unit (RSU) and BASE
Portable Test Interface to J2 via an additional interface cable
and issuing the appropriate commands via RSU menu selections. When
the associated PTI is not attached, the MCR500 will automatically
record signals, which are applied to the ABF inputs when power is
applied.
Visual indication is provided to show the status of
power, mode and FDR and CVR fault signals supplied by the MCR500.
Applicability
| Manufacturer |
Product |
| BASE™ |
MCR-500 |
back to list
of interfaces
|
